|
GYT-R" Dual Oval Slip-On Exhausts
|
For closed course competition only. " Features anodized 6061-T6 aluminum end caps, ball-burnished stainless steel mounting straps, and Silent Sport" pillow packing. Achieves an increase of approximately 3~5hp from 6600 rpm on up throughout the rpm range with a 7.1 hp maximum gain. While providing up to a 7.3 ft lb increase in torque. Easy-to-install. Fits '04 and '05 R1, Carbon Fiber shell with Stainless inlet pipes
|
|
|
|
|
|
|
GYT-R" Titanium Oval Slip-On Exhaust
|
For closed-course competition use only. Achieves an increase of about 6 horsepower throughout the power band with a 7 horsepower increase at peak rpm. Up to 8 ft-lb more torque at 3500 rpm and 2.2 ft-lb increase in peak torque. Features a titanium shell with perforated titanium core and inlet pipe. Inlet pipe 4.5 lb. lighter than stock. Ball-burnished 061-T6 aluminum end caps, ball-burnished stainless steel mounting strap and reinforcement bands, plus Silent Sport pillow packing. Fits '02~'03 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Oval Slip-On Exhaust
|
For closed-course competition use only. Achieves an increase of about 6 horsepower throughout the power band with a 7 horsepower increase at peak rpm. Up to 8 ft-lb more torque at 3500 rpm and 2.2 ft-lb more in peak torque.Features a carbon fiber shell with polished stainless steel inlet pipe; nearly 4 lb. lighter than stock. Ball-burnished 6061-T6 aluminum end caps, ball-burnished stainless steel mounting strap and reinforcement bands, plus Silent Sport" pillow packing. Fits '02~'03 R1
|
|
|
|
|
|
|
GYT-R" High Flow Air Filter
|
GYT-R" design offers increased air flow and filtration for better engine protection and performance. Washable and reusable. Fits 04~'05 R1
|
|
|
|
|
|
|
GYT-R" Air Funnel Set
|
Use this GYT-R Air Funnel Set on the #2 and #3 cylinders for more horsepower. These funnels are longer than stock, and are designed to provide about a 3.5 horsepower increase in the 7,000-8,000 rpm range as well as about 2 horsepower increases in the 9,000-11,000 rpm range. Used by the Factory Formula Xtreme road race team. Molded rubber construction. Fits '02~'03 R1. For closed-course competition use only.
|
|
|
|
|
|
|
K&N Replacement Air Filter
|
High-quality K&N filtration for high performance and superior protection. Fits '02~'03 R1
|
|
|
|
|
|
|
Frame Slider Protectors
|
Helps protect the frame and bodywork on a low side fall. (Set of two.) Fits '04~'05 R1
|
|
|
|
|
|
|
Frame Slider Protectors
|
Helps to protect the frame and bodywork on a low side fall. Fits '02~'03 R1
|
|
|
|
|
|
|
Silver Seal Cowl
|
Quickly change the styling of your bike by adding a color matched seat cowl.Fits 04~'05 R1, Silver
|
|
|
|
|
|
|
Red Seat Cowl
|
Quickly change the styling of your bike by adding a color matched seat cowl.Fits 04~'05 R1, Red
|
|
|
|
|
|
|
Blue Seat Cowl
|
Quickly change the styling of your bike by adding a color matched seat cowl.Fits 04~'05 R1, Blue
|
|
|
|
|
|
|
R1 Seat Cowls
|
Add this to your bike to change the styling to a race look. Easy to install. Saves 1/4 pound.Fits '00~'01 R1, Red
|
|
|
|
|
|
|
R1 Seat Cowls
|
Add this to your bike to change the styling to a race look. Easy to install.Fit's '98~99 R1
|
|
|
|
|
|
|
R1 Seat Cowls
|
Add this to your bike to change the styling to a race look. Easy to install. Saves 1/4 pound.
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Lower Tank Trim
|
Easy to install for a stylish appearance. (Set of two.) Fits '04~'05 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Dash Cover
|
Unique dash accent in real carbon fiber.Fits '98~'01 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Fairing Accents
|
Replace the stock plastic fairing accents with real carbon fiber. Saves 1/4 pound. (Sold in pairs.)
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Top Clamp Panel
|
Accent your top fork clamp with this, easy-to-install carbon fiber piece.Fits '04~'05 R1
|
|
|
|
|
|
|
GYT-R" Clutch Cable Cover
|
Replace stock cover with this carbon fiber piece. Easy to install. Fits '04~'05 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Front Fender
|
This special lightweight composite-design front fender mounts with stock hardware. Fits '02~'05 R1 and '05 R6
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Rear Fender/Chain Guard
|
Combines chain guard with rear fender in one highly stylized carbon fiber piece. Light weight. Install using stock mounting hardware. Fits 04~'05 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Rear Fender
|
This special composite-design rear fender mounts with stock hardware. Saves1/4 pound.
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Chain Guards
|
This lightweight chain guard is made of real carbon fiber with a high-gloss finish. Replaces stock part with original mounting hardware. Saves 1/4 pound.Fits '02 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Heat Shield
|
This carbon fiber shield simply replaces stock. Makes a stylish addition when Slip-on mufflers are installed. Fits 04~'05 R1
|
|
|
|
|
|
|
GYT-R" Carbon Fiber Heel Guards
|
Lightweight and functional! (Sold in pairs.)Fits '04~'05 R1
|
|
|
|
|
|
|
Smoke Windshield
|
Replacement for stock windshield with smoke tint for a custom look. Uses stock mounting hardware. Fits '02~'03 R1
|
|
|
|
|
|
|
Smoked Windshield
|
Customize your bike with this stock replacement smoked windshield. Uses stock monting hardware. Fits '04~'05 R1
|
|
|
|
|
|
|
R1 Half Cover
|
4-way stretch vinyl cover helps protects your tank from abrasion. Fits '02~'03 R1
|
|
|
|
|
|
|
R1 Half Cover
|
4-way stretch vinyl cover helps protects your tank from abrasion. Fits '98~'01 R1
|
|
|
|
|
|
|
Fuel Cap Accent
|
Add a custom look with this accessory fuel cap accent. Easy to apply. Available in either carbon fiber or chrome finishes.
|
|
|
|
|
|
|
Tank Pads
|
Helps protect your gas tank from nicks and abrasions caused by belt buckles, snaps, or zippers.Fits '98~'02 R1 and R6, '04 FZ6, All FZ1, Black
|
|
|
|
|
|
|
Tank Pads
|
Helps protect your gas tank from nicks and abrasions caused by belt buckles, snaps, or zippers. Blue
|
|
|
|
|
|
|
Carbon Fiber Tank Pad
|
Helps protect your gas tank from nicks and abrasions caused by belt buckles, snaps or zippers.
|
|
|
|
|
|
|
Chrome Tank Pad
|
Helps protect your gas tank from nicks and abrasions caused by belt buckles, snaps, or zippers.
|
|
|
|
|
|
|
Billet Oil Cap
|
Billet aluminum oil cap features a pre-drilled hole for safety wire.
|
|
|
|
|
|
|
Billet Oil Cap
|
Billet aluminum oil cap features a pre-drilled hole for safety wire. Blue Anodized
|
|
|
|
|
|
|
Billet Oil Cap
|
Billet aluminum oil cap features a pre-drilled hole for safety wire. Red Anodized
|
|
|
|
|
|
|
Billet Covers with Tuning Fork Logo
|
Billet aluminum cover with Tuning Fork Logo.Fits '04~'05 R1
|
|
|
|
|
|
|
Sport Tail Bag
|
Foam construction and compression molding allows for a semi-soft feel that maintains its shape while empty.
|
|
|
|
|
|
|
Sport Tank Bag
|
Foam construction and compression molding allows for a semi-soft feel that maintains its shape while empty.
|
|
|
|
|
|
|
Expandable Tank Bags
|
Durable long-lasting Tri-Max polyester treated with UVEX. (a UV-protection process formulated to help prevent fading caused from the sun and other natural elements.) Features some of the strongest, heavy-duty magnets in the industry. All magnets are caped to help minimize the chance of magnetizing any of your contents and increasing the strength of the magnets. High quality embroidery to proudly display the Yamaha image. The expandable gusset allows greater storage capacity when more room is needed. The Micro-Hug fiber base will grip the tank better than others and not scratch the paint. The interior is fully lined and has bound seams for a clean look. Internal mesh pocket and extra storage compartments. Detachable map pocket is easily reversible for quick reference. Non-corrosive hardware will not rust or be beaten by the elements. Carries our Lifetime warranty. 10-3/4" X 4-1/2" X 12" non-expanded -- 10-3/4" X 7-1/2" X 12" fully expanded. Fits R1 and R6.
|
|
|
|
|
|
|
Rear Stand
|
Factory race team inspired design. Durable and easy to use. Super lightweight construction using 6061-T6 aircraft-quality aluminum. Special ball-burnished finish provides a ultra-durable surface finish. Must be used in combination with front stand. Requires swing arm spools.
|
|
|
|
|
|
|
Front Stand
|
Factory race team inspired design. Durable and easy to use. Super lightweight construction using 6061-T6 aircraft-quality aluminum. Special ball-burnished finish provides a ultra-durable surface finish. Must be used in combination with rear stand.
|
|
|
|
|
|
|
Swing Arm Spools
|
One-piece construction with machined Tuning Fork accent. Fits all R1 and R6., Black Anodized
|
|
|
|
|
|
|
Swing Arm Spools
|
One-piece construction with machined Tuning Fork accent. Fits all R1 and R6., Clear Anodized
|
|
|
|
|
|
|
Swing Arm Spools
|
One-piece construction with machined Tuning Fork accent.Fits all R1 and R6., Red Anodized
|
|
|
|
|
|
|
Swing Arm Spools
|
One-piece construction with machined Tuning Fork accent.Fits all R1 and R6., Blue Anodized
|
|
|
|
|
|
